MK-4000 Series Self-Propelled Concrete Saw


FEATURES:

 • Gas version made in the USA - Diesel version assembled in the USA
• Ergonomic joystick allows one-handed control of traverse and cutting   
   depth
• Quick release, auto latching bayonet mount blade guard
• Enclosed blade shaft with oil bath lubrication system
• 3 position adjustable solid steel handle bars
• Blade guard has garden hose style connector for quick disconnecting
• Telescoping front pointer 
• Instrumentation includes engine tach, fuel level and hour meter
• Indicator lights for oil pressure, cylinder head temperature, parking
   brake, headlight and low battery voltage
• Blade protection system shuts down engine during wet cutting if water
   pressure drop is detected
• Depth of cut indicator
• Separate valve controls for blade guard and wash down spray head
   24", 30" and 36" blade guard kits available
• Saw designed for left or right side mounting of blade and blade guard
• Blade guard water distribution system designed for optimal blade cooling
• Lifting bail
• Manually operated disc parking brake
• Positive depth stop
• Removable rear and side panels for easy service
• Center shaft blade drive system with Polychain positive displacement belt
   from engine to center shaft
• 7M Poly-V belt final drive from center shaft to blade shaft
• Electro-hydraulic pump raises blade, user adjustable valve for setting
   blade lowering rate
• Wide front wheel base increases stability and allows ramp
   loading/unloading
• Eaton model 6 Hydrostatic transmission coupled to an MK differentiating
   trans-axle
• Differential Lock for cutting on slippery surfaces
• Transmission can be disengaged from axle to allow saw to be pushed
   manually
• Travel speed 0-220 FPM forward, 0-100 FPM reverse
• Netural start switch to prevent starting with transmission in gear
 

GENERAL  SPECIFICATIONS:
Arbor
1" with 3/8" Drive Pin
Blade Shaft RPM - 24" Guard
2000
Blade Shaft RPM - 30" Guard
1500
Blade Shaft RPM - 36" Guard
1300
Depth of Cut - 24" blade
10"
Depth of Cut - 30" blade
12-1/2"
Depth of Cut - 36" blade
15"
Fuel Capacity
6.75 Gallons
Starting System
Electric
Height
49" (1245mm)
Minimum Saw Length
48" (1219mm)
Maximum Overall Length
99" (2515mm)
Handle Extension
22" (559mm)
Maximum Pointer Extension
20" (508mm)
Frame Width
29" (737mm)
Frame Length
42" (1067mm)
Saw Width
34-1/2" (876mm)
Outside to Outside Wheel Width - Front
23-3/4" (603mm)
Outside to Outside Wheel Width - Rear
27-3/4" (705mm)
Blade to Wall
1-7/8" (48mm)
Wheel Base Length
20" (508mm)
Maximum Overall Height (Pointer Up)
46-3/4" (1187mm)
 MODEL  MK-4000  MK-4000D
Engine
Wisconsin Gas
Deutz Diesel
Horsepower
35
29
Weight
1150 lbs. (522 kg)
1190 lbs. (540 kg)
ANNOLOG CONSOLE  MK-4000 Part #  MK-4000D Part #
24" Blade Guard
162465-A
162468-A
30" Blade Guard
162466-A
162469-A
36" Blade Guard
162467-A
164946-A