Advantages:
   . Provides a stress relief layer
   . Reduces reflective cracking/Increases overlay life
   . Lowers pavement maintenance costs
   . Minimal traffic disruption
   . Reduces further structural deterioration
   . Reduces moisture penetration/Waterproofs

PavePrep is a high density mastic laminated with a tough woven polyester designed specifically to withstand the loads encountered by highway traffic and stress concentrations at pavement joints and cracks. Once applied to these distressed areas, PavePrep’s dense and flexible mastic reduces the tendency for cracks to reflect through the overlay by dispersing the pavement stress. PavePrep installation is fast and economical requiring no special equipment. Unroll at the job site and apply. Use PavePrep on milled and unmilled surfaces with the application of an AC tackcoat. PavePrep SA (Self Adhesive) comes with a peel-and-stick adhesive on the application side and does not require a tackcoat for most surfaces. PavePrep performance is optimized on road surfaces that do not exhibit structural deficiencies or drainage problems. For complete details on PavePrep application thoroughly read the application instructions. For roll size availability see Product Data Sheet. Literature|Installation Instructions | Data Sheets

GeoTac is a peel-and-stick waterproofing membrane designed specifically as a moisture barrier. It prevents water permeation or penetration through pavement surfaces and subsequent damage that moisture causes. GeoTac can be quickly installed with basic labor. GeoTac is high caliper and uses a full modified SBS asphalt mastic applied to a non-woven polypropylene geotextile. GeoTac is particularly suited for the following applications: • Bridge Decks • Waterproofing Highways • Shoulder Joints prior to overlay. For roll sizes availability see Product Data Sheet. Literature |Installation Instructions | Data Sheets