PMSI offers a top quality line supplies and safety materials.

   For specifications and features for any of our rental equipment refer to the
   equipment section of this web site or contact your nearest PMSI location.

BARRICADES
GET QUOTE 1

T3B Type III Barricade System

The Davidson Traffic Control Products T3B Type III Barricade System is the simplest Type III barricade on the market.
A complete unit consists of (3) 8-1/4" wide plastic panels, (2) 1.75" plastic or steel uprights, (2) 2" PSST, angle iron or portable rubber feet and (1) set of assembly hardware. All of these configurations are NCHRP 350 approved.

Other features include:

  • A 3-year pro-rated warranty on the barricade panels against breakage and sheeting adhesion.
  • A complete upright assembly only weighs 22# and can be quickly and easily installed by one person.
  • Faster set up reduces worker exposure to road hazards.
  • The T3B readily yields when struck by a vehicle. This allows vehicles to pass over the T3B without causing damage to the passenger compartment.
  • Durable high-density polyethylene plastic and component design allows for multiple hits with minimal damage.
  • Parts are easily interchangeable thereby reducing maintenance labor costs.
  • Available in various lengths and reflective sheeting options.

GET QUOTE 2

Type 1 and Type II Steelcade Barricades
Our  Type I and II barricade panels are manufactured from specially engineered plastic that allows them to withstand impacts when other plastic or wooden panels would break or splinter. Additional features include:

  • 4", 6", 8" and 12" x 24" panels carry the same 3-year pro-rated warranty against breakage as the T3B panels
  • Top side of the panels have a smooth surface allowing for easy application of reflective sheeting
  • Panels were impact tested to ensure durability in the field
  • All of the T1B and T2B components are interchangeable and are available as complete units or components
  • Folds and stacks flat
  • Available with 12 or 14 Ga. powder-coated or galvanized angle iron legs
  • Allows for easy light attachment
  • T1B and T2B barricades are lightweight, easy to use and service
  • NCHRP 350 compliant
GET QUOTE 3

Type 1 and Type II M-Cade Barricades
The most versatile barricade system on the market today.
Imagine having the ability to build TYPE I, TYPE II, TYPE III, and N-Cade barricades using the same basic parts. The M-Cade system utilizes seven basic components that can be assembled to create the right barricade for any work zone.

  • Barricade light mount
  • Unique knuckle eliminates the need for bolts, making assembly easy
  • Converts to a TYPE I, TYPE II, or N-Cade using the same components
  • Universal left/right legs
  • Predrilled holes for easy panel mounting (No drilling required)
  • Plastic panels are predrilled and will not rot
  • Folds flat for easy storage

GET QUOTE 4

Parade-Style A-Frame Barricade
Our new innovative O-Frame barricade leg
can be used as a standard A-Frame style barricade
or as an ADA compliant device.

  • Unique four board design
  • Center slots have a pinch point design locking the panels in place
  • Center slots will accept our 1" Type 3 panel or our 2" parade panel
  • Bottom slots will accept our 1" Type 3 panel
  • Bottom panels provide ADA compliance per section 6F.68 Detectable Edging for pedestrians per the MUTCD
  • Bottom panel is no more than 2.5 inches from the ground providing a continuos detectable edge for guidance
  • Polycarbonate O-Frame insert available that can be customized per your requirements
  • O-Frame insert is ideal for municipalities, advertising, corporate logo's, etc.
  • 2" x 8" parade panels are made of durable lightweight plastic that will not rot, rust, crack or peel
  • 2" x 8" panels are available in various lengths and reflective sheeting options
  • Both the 2" parade panel and the 1" Type 3 panels carry a 3-year warranty against breakage and sheeting adhesion
  • NCHRP 350 compliant

     
 
© Paving Maintenance Supply Inc.  Home | Contact Us | Specials
Paving Maintenance Supply, Inc. is a Wholly Owned Subsidiary of Crafco, Inc.