| MK-4000 Series Features: |
| . |
Gas version made in the USA - Diesel version assembled in the USA |
| . |
Ergonomic joystick allows one-handed control of traverse and cutting depth |
| . |
Quick release, auto latching bayonet mount blade guard |
| . |
Enclosed blade shaft with oil bath lubrication system |
| . |
3 position adjustable solid steel handle bars |
| . |
Blade guard has garden hose style connector for quick disconnecting |
| . |
Telescoping front pointer |
| . |
Instrumentation includes engine tach, fuel level and hour meter |
| . |
Indicator lights for oil pressure, cylinder head temperature, parking brake, headlight and low battery voltage |
| . |
Blade protection system shuts down engine during wet cutting if water pressure drop is detected |
| . |
Depth of cut indicator |
| . |
Separate valve controls for blade guard and wash down spray head |
| . |
24", 30" and 36" blade guard kits available |
| . |
Saw designed for left or right side mounting of blade and blade guard |
| . |
Blade guard water distribution system designed for optimal blade cooling |
| . |
Lifting bail |
| . |
Manually operated disc parking brake |
| . |
Positive depth stop |
| . |
Removable rear and side panels for easy service |
| . |
Center shaft blade drive system with Polychain positive displacement belt from engine to center shaft |
| . |
7M Poly-V belt final drive from center shaft to blade shaft |
| . |
Electro-hydraulic pump raises blade, user adjustable valve for setting blade lowering rate |
| . |
Wide front wheel base increases stability and allows ramp loading/unloading |
| . |
Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle |
| . |
Differential Lock for cutting on slippery surfaces |
| . |
Transmission can be disengaged from axle to allow saw to be pushed manually |
| . |
Travel speed 0-220 FPM forward, 0-100 FPM reverse |
| . |
Netural start switch to prevent starting with transmission in gear |
